Superior conductivity for ESD flooring

Benefits of TUBALL™

  • TUBALL enables high conductivity at significantly lower loadings
  • Meets ESD standards (ASTM F150, ANSI/ESD S 2020, IEC 61340-5-1)
  • Permanent and uniform electrical conductivity without “hot spots”
  • Compatible with a variety of color shades and self-leveling systems
  • Easy to use nanotube concentrates

TUBALL™ single wall carbon nanotubes are superior to other conductive additives due to their significantly reduced loading levels, ranging from 0.01% to 0.2% by weight.

Unlike other additives with higher loading levels, single wall carbon nanotubes provide uniform permanent conductivity without significantly impacting color, mechanical properties, or surface finish.

tuball-loadings-epoxy-polyester.png

How do I get a sample?

TUBALL Coatings Solutions

OCSiAl supplies TUBALL in the form of super concentrates and suspensions available for epoxy, polyester, polyurethane, acrylic, and other matrix materials. With the most advanced research and development facility dedicated to single wall carbon nanotube applications, OCSiAl is uniquely capable of integrating nanotube solutions with your ESD flooring materials.


EXAMPLE FORMULATIONSTUBALL™ SOLUTION
Polymer Solvent-Free or Solvent-Based
epoxy
polyester
polyurethane
Water-Based
1K acrylic
2K acrylic
2K epoxy
2K polyester (UV-curable)

TUBALL solutions are available for a wide range of material systems, including the example formulations listed here. Contact your OCSiAl representative to discuss solutions specific to your formulation.

How do I get a sample?

Case Study: UJET

A European producer of industrial flooring needed to install an anti-static epoxy floor for UJET, a new smart electric vehicle manufacturer. The project required anti-static performance compatible with a self-leveling epoxy system. A walking voltage test was required to audit the installation.

ANTI-STATIC EPOXY FLOOR at UJET
Solution0.01 wt. % of TUBALL delivered via TUBALL MATRIX 201 super concentrate
ESD PerformanceResistivity to ground 10^7 Ω (ANSI/ESD S7.1, DIN EN 61340-4-1)
Goal AchievedWalking voltage test < 10 volts (DIN EN 61340-4-5)

ujet-walking-test-web.jpg

How do I get a sample?

Case Study: TEOHIM

TEOHIM, one of the largest producers of flooring in Russia, used TUBALL to develop a line of anti-static epoxy floorings. This application required no negative impact on viscosity or color. TEOHIM is currently promoting the new product line based on TUBALL to international customers.

ANTI-STATIC EPOXY FLOOR PRODUCT at TEOHIM
Solution0.01 wt. % of TUBALL delivered via TUBALL MATRIX 201 super concentrate
ESD PerformanceVolume resistivity 10^8 Ω*cm
Goal AchievedSelf-leveling with no significant impact on viscosity or color

teohim-esd-floor-web.jpg

Request a Free Sample

Find out how we change the world
カーボンの時代